Legrand Cantilever Arm Bracket Hot Dip Galvanised Steel Cable Tray Fixing Plate, 100 mm Width, 74mm Depth

  • RS-stocknr. 163-3073
  • Fabrikantnummer LCA100G
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specificaties
Kenmerk Waarde
Accessory Type Cantilever Arm Bracket
Material Hot Dip Galvanised Steel
Width 100 mm
For Use With Flat Surface Tray, Swiftrack Channel
Tray and Basket Type Cable Tray
Duty Type Heavy Duty, Light Duty, Medium Duty
Depth 74mm
Series LCA
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
9,44
(excl. BTW)
11,42
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
9,44 €
10 +
8,50 €
Related Products
The Unistrut steel base plate is a solid ...
Description:
The Unistrut steel base plate is a solid piece of material that has enough strength and sturdiness to serve as the surface to fix channel supports. Using a flat supporting plate at the base of a column helps distribute the ...
The Cablofil International compact cantilever arm cable tray ...
Description:
The Cablofil International compact cantilever arm cable tray is a universal mounting arm from the CM series. It is made of 316 stainless steel material. This arm is compact, easy to use. • Medium duty• Provides corrosion protection• Support steel ...
Cantilever arms are for universal mounting and used ...
Description:
Cantilever arms are for universal mounting and used to support steel wire cable trays. The arms are wall mounted or use channel and EDF mounting rails. Quick and easy to use. Cantilever armsCompactUniversal mountingWall, Channel and EDF mountsSupport steel wire ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It is made of 316 stainless steel material and is 100mm wide. It used in pairs on side rails for steel cable tray. Plated with ecologic zinc, ...