Cablofil International Hinged Coupler PVC Cable Tray Coupler, 75 → 150 mm Width

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: ES
Productomschrijving

Cablofil Couplers

PVC couplers for PVC cable tray. Straight coupler: RS 125-1633; hinged coupler: RS 125-1634.

Cablofil Medium Duty PVC Cable Tray

PVC cable tray is corrosion free and has excellent fire resistance. It is also resistant to chemical agents, moisture and saline environments.

Easy to install
Eco-friendly: PVC is 100% recyclable
Can be installed inside and outside
Suitable for use in chemical or petrochemical industries, paper or food processing
Suitable for use in commercial environments like storage areas, car parks offices and service ducts
RoHS compliant

Specificaties
Kenmerk Waarde
Accessory Type Hinged Coupler
Material PVC
Series PCT
Standards Met EN 61537
For Use With PVC Cable Tray
Width 75 → 150 mm
Tray and Basket Type Cable Tray
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29/07/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 20)
6,857
(excl. BTW)
8,297
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
20 - 80
6,857 €
137,14 €
100 +
6,171 €
123,42 €
*prijsindicatie
Related Products
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
Pre-galvanised medium duty couplersCouplers are required for joining ...
Description:
Pre-galvanised medium duty couplersCouplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drillingMRFC standard couplers are supplied in pairsMRFC standard coupler is supplied singly.