Legrand Heavy Duty Adjustable Bend Hot Dip Galvanised Steel Cable Tray, 150 mm Width, 50mm Depth

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Heavy Duty Accessories

Bends, risers, tee pieces, and couplers
The bends and risers are adjustable between 0° and 90°
The coupler set will join two lengths of tray

Approvals

BS729

Specificaties
Kenmerk Waarde
Accessory Type Heavy Duty Adjustable Bend
Material Hot Dip Galvanised Steel
Width 150 mm
Depth 50mm
Series Swifts
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
43,33
(excl. BTW)
52,43
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
43,33 €
10 - 49
41,17 €
50 +
39,00 €
Related Products
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
The Legrand cantilever arm is a cable tray ...
Description:
The Legrand cantilever arm is a cable tray from the LCA series. It provides bracket for cable support system. The housing of tray is made of stainless steel material. This enable horizontal runs of cable tray to be mounted to ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...