Legrand Heavy Duty Coupler Set Hot Dip Galvanised Steel Cable Tray, 50mm Depth

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Heavy Duty Accessories

Bends, risers, tee pieces, and couplers
The bends and risers are adjustable between 0° and 90°
The coupler set will join two lengths of tray

Approvals

BS729

Specificaties
Kenmerk Waarde
Accessory Type Heavy Duty Coupler Set
Material Hot Dip Galvanised Steel
Depth 50mm
Series Swifts
67 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Set
5,51
(excl. BTW)
6,67
(incl. BTW)
Set(s)
1 - 9
5,51 €
10 - 49
5,24 €
50 +
4,97 €
Related Products
The Cablofil International compact cantilever arm cable tray ...
Description:
The Cablofil International compact cantilever arm cable tray is a universal mounting arm from the CM series. It is made of 316 stainless steel material. This arm is compact, easy to use. • Medium duty• Provides corrosion protection• Support steel ...
Cantilever arms are for universal mounting and used ...
Description:
Cantilever arms are for universal mounting and used to support steel wire cable trays. The arms are wall mounted or use channel and EDF mounting rails. Quick and easy to use. Cantilever armsCompactUniversal mountingWall, Channel and EDF mountsSupport steel wire ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It used in pairs on side rails for steel cable tray. Quick and easy to use, the connectors are plated with ecologic zinc. • Easy to mount• ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...