Analog Devices 5 V Cable Transceiver 32-Pin BGA, LTM2882CY-5#PBF

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

RS-232 Line Drivers and Receivers, Linear Technology

Linear Technology RS232 Transceiver and Line driver/receivers provide a range of single ended configurations. The data transmission RS232 is also known as TIA-232 supplies serial interface data rates up to 10 Mbps. The RS232 standard states the electrical characteristics and connector for point-to-point modem interface.

Data terminal equipment (DTE), data communications equipment (DCE) configuration for the 3.3V / 5V supply voltage

RS-232 Line Drivers and Receivers

Specificaties
Kenmerk Waarde
Number of Transmitters 2
Number of Receivers 2
Number of Transceivers 2
Number of Drivers per Line 2
Number of Receivers per Line 2
Data Rate 10Mbps
Mounting Type Surface Mount
Package Type BGA
Pin Count 32
Transmitter Signal Type Single Ended
Receiver Signal Type Single Ended
Interface Standards RS-232
Power Supply Type Single
Typical Single Supply Voltage 5 V
Minimum Operating Temperature 0 °C
Dimensions 15 x 11.25 x 3.42mm
Height 3.42mm
Maximum Operating Temperature +70 °C
Length 15mm
Width 11.25mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10/03/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 119)
11,376
(excl. BTW)
13,765
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
119 +
11,376 €
1.353,744 €
*prijsindicatie
Related Products
Linear Technology’s RS485 standards are widely used in ...
Description:
Linear Technology’s RS485 standards are widely used in local networks as well as data transfer over long distances and they are ideal in industrial and commercial applications. The Profibus (Process Field Bus) protocol is carried out for fieldbus solutions in ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
1.0ps(RMS) Jitter (max) at 670MHz80ps(P-P) Jitter (max) at ...
Description:
1.0ps(RMS) Jitter (max) at 670MHz80ps(P-P) Jitter (max) at 800Mbps Data Rate+3.3V SupplyLVDS Fail-Safe Inputs (MAX9174)Anything Input (MAX9175) Accepts Differential CML/LVDS/LVPECLPower-Down Inputs Tolerate -1.0V and VCC + 1.0VLow-Power CMOS Design10-Lead μMAX and Thin QFN Packages-40°C to +85°C Operating ...