, Cable Transceiver

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

RS-485 Line Drivers and Receivers, Linear Technology

Linear Technology’s RS485 standards are widely used in local networks as well as data transfer over long distances and they are ideal in industrial and commercial applications. The Profibus (Process Field Bus) protocol is carried out for fieldbus solutions in factory and process automation environments. The RS422 standard is similar to the RS485 standard but does not permit multiple drivers on a bus.

The RS485 Transceiver (formally TIA-485) defines a differential data transmission up to 10Mbps.The low power CMOS RS485/RS422 Interface transceivers feature failsafe receivers, high voltage, high data rates, high ESD protection types and transceivers (TXRX) featuring pin-controlled switchable 120 Ohm termination resistors.

Balanced line offers excellent noise rejection

RS-485 Line Drivers and Receivers

Specificaties
Kenmerk Waarde
Number of Transmitters 1 (RS232), 1 (RS485)
Number of Receivers 1 (RS232), 1 (RS485)
Number of Transceivers 1
Number of Drivers per Line 1 (RS232), 1 (RS485)
Number of Receivers per Line 1 (RS232), 1 (RS485)
Data Rate 20Mbps
Mounting Type Surface Mount
Package Type LGA
Pin Count 32
Transmitter Signal Type Single Ended
Receiver Signal Type Differential
Interface Standards RS-422/ RS-485
Power Supply Type Single
Typical Single Supply Voltage 5 V
Length 15mm
Maximum Operating Temperature +70 °C
Dimensions 15 x 11.25 x 2.8mm
Minimum Operating Temperature 0 °C
Width 11.25mm
Height 2.8mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 119)
11,663
(excl. BTW)
14,112
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
119 +
11,663 €
1.387,897 €
*prijsindicatie
Related Products
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
Microchip’s LAN8820 is a Gigabit Ethernet Transceiver IC ...
Description:
Microchip’s LAN8820 is a Gigabit Ethernet Transceiver IC with a RGMII Interface that fully complies with IEEE 802.3 and 802.3ab. It contains a full-duplex transceiver for 1000Mbps operation and can be configured to communicate with an Ethernet MAC.Also featured is ...
Microchip’s LAN8741A is a Fast Ethernet Transceiver IC ...
Description:
Microchip’s LAN8741A is a Fast Ethernet Transceiver IC that complies with the Energy-Efficient Ethernet standard IEEE 802.3az. This technology reduces power consumption by placing the PHY transmitters into a Sleep mode during periods of inactivity. Further power management options are ...
The Microchip KSZ9131 is a fully integrated Ethernet ...
Description:
The Microchip KSZ9131 is a fully integrated Ethernet transreceiver with triple-speed (10Base-T/100Base-TX/1000Base-T) for transmission and reception of data on standard CAT-5, CAT-5e and CAT6 unshielded twisted pair (UTP) cable. Power-down and power-saving modesInterrupt pin optionAutomatic detection and ...