Fluke 2042T Cable Tracer Transmitter CAT III 300 V, Maximum Safe Working Voltage 400V

  • RS-stocknr. 513-1812
  • Fabrikantnummer FLUKE 2042T
  • Fabrikant Fluke
Wetgeving en conformiteit
Land van herkomst: CN

Fluke 2042 Cable Tracer Kit

Fluke 2042 cable locating set comprises a transmitter and receiver in a hard carrying case. The transmitter connects to the cable / metal pipe to be traced and sends a carrier signal containing a user-selected code. The non-contact receiver detects the signal and displays the code. Additional transmitters are available to allow multiple cables / pipes to be traced and identified. Both live and dead circuits can be located.

Features & Benefits

Traces cable & metal water/heating pipes in walls and underground Locates fuses and assignment to circuits
Locates concealed sockets and distribution boxes
Locates interruptions and short circuits in unshielded electrical cables & underfloor heating
Tracing depth up to 2.5 m dependent on cover material
Mains voltage location up to 0.4 m
Transmitter LCD display for transmission level, transmitting code and external voltage
Receiver with LCD display of received signal level, code and live voltage indication
Torch lamp function
2500 A ac current measurement with iFlex flexible current probe


Additional transmitters are available separately for extension or to distinguish between several signals

Supplied with

2042 receiver, 2042T transmitter, test leads (x4), crocodile clips (x2), test probes (x2), Hard carry case, instructions, PP3 battery and 6xAA alkaline batteries

Kenmerk Waarde
Display Type LCD
Meter Type Cable Tracer
Safety Category CAT III 300 V
Battery Type AA
Power Source Battery
Includes Battery, Transmitter
Maximum Frequency 60Hz
Maximum Operating Temperature +40°C
Maximum Safe Working Voltage 400V
Minimum Frequency 0 Hz
Minimum Operating Temperature 0°C
Minimum Safe Working Voltage 12V
Safety Category Level CAT III
Model Number p 2042T
Safety Category Voltage 300V
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
422,00 €
Related Products
Quick Scan Wire Tracing: quick wire detection at ...
Quick Scan Wire Tracing: quick wire detection at a longer distancePrecision Wire Tracing: precisely pinpoints wires or faults located behind walls, floors, or ceilingsBreaker Identification: automatic sensitivity feature that allows for quick and easy breaker locating without the guessworkNon-Contact Voltage ...
DRN5 is a load accessory for low-voltage network ...
DRN5 is a load accessory for low-voltage network under voltage, aimed at helping operators in their research, localization and fixing of broken neutral. DRN5 is in the form of an unbalanced load three-phase suitcase 5 kW, secured electrically and thermally. ...
Locate cable and wire ground faults, sheath faults ...
Locate cable and wire ground faults, sheath faults or pipeline coating defects, where the utility is in direct contact with the groundThe intuitive transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz ...
Each kit consists of: one transmitter, one receiver, ...
Each kit consists of: one transmitter, one receiver, one male F-to-F connector adapter cable, one male F-to-alligator clip adapter cable, and a 700C carrying case. Designed specifically for the CATV industry, the Model 402K will send tone through any passive ...