Tempo PTS Pair Tracing System Cable Tracer Kit

  • RS-stocknr. 268-357
  • Fabrikantnummer 50646842
  • Fabrikant Tempo
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

PTS100/200 - Pair Tracing Kit

The PTS Pair Tracing System comprises the PTS 200 Tone Generator and the PTS 100 Probe in a woven polyester carrying pouch. The System is designed to provide an easy to use and cost effective means of tracing wire pairs

Fast, Accurate Wire Identification
Sends Tone to Identify Wires
Polarity Indication
Continuity Test
Adjustable Volume Control
Easy to Operate
2-Line Modular Test Lead
Rugged Industrial design
Water Resistant

Typical Applications:

PTS 200 Tone Generator:

The PTS 200 may be connected via the modular plug or the crocodile clips to the pair under test. Depending on the switch position the Tone Generator will test Polarity continuity or short circuits. The PTS 200 can be used on twisted pair wiring (Telecom, Datacom, security / alarm, audio and electrical), single conductors, coaxial cables, de-energized AC wiring and just about any other wiring you can think of.

PTS 100 Probe:

The PTS 100 Probe has a built-in loudspeaker to make it easy to hear the tracing signals and a near/far sensitivity Adjustment to allow both broad searches and pinpoint identification of wires. To operate just press the button on the top and adjust the sensitivity control to hear the tone generated by the PTS 200

Note

Only for use on non-powered cables, powered by PP3 batteries (not supplied).
Image for illustration purposes only

50646842 Cable Tracer is equipped with a BT plug.

Specificaties
Kenmerk Waarde
Meter Type Cable Tracer
Battery Life 290 h
Battery Type 9V
Power Source Battery
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p PTS Pair Tracing System
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
32 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
77,11
(excl. BTW)
93,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
77,11 €
Related Products
TRIPHASOR is an instrument for optimising the operation ...
Description:
TRIPHASOR is an instrument for optimising the operation of electrical distribution networks. It measures the electric grid characteristics in real time and enables the identification of each phase on a phased network. TRIPHASOR is used on live low tension networks, ...
Quick Scan Wire Tracing: quick wire detection at ...
Description:
Quick Scan Wire Tracing: quick wire detection at a longer distancePrecision Wire Tracing: precisely pinpoints wires or faults located behind walls, floors, or ceilingsBreaker Identification: automatic sensitivity feature that allows for quick and easy breaker locating without the guessworkNon-Contact Voltage ...
Locate cable and wire ground faults, sheath faults ...
Description:
Locate cable and wire ground faults, sheath faults or pipeline coating defects, where the utility is in direct contact with the groundThe intuitive transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz ...
Detection of wires in the wall, open circuits, ...
Description:
Detection of wires in the wall, open circuits, short circuits in wiresDetection of fuses and assignment to circuitsDetection of accidentally plastered sockets and distribution boxesSet consisting of transmitter and receiver in impact-resistant, robust storage caseTransmitter signal indicated optically and ...