TE Connectivity Straight, Modified Polyolefin Adhesive Lined, 31mm
- RS-stocknr.:
- 718-3200
- Fabrikantnummer:
- 202K142-3/42-0
- Fabrikant:
- TE Connectivity
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 718-3200
- Fabrikantnummer:
- 202K142-3/42-0
- Fabrikant:
- TE Connectivity
Datasheets
- Moulded Boot Straight size 42
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
Wetgeving en conformiteit
Productomschrijving
Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series
High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).
Specificaties
Kenmerk | Waarde |
|---|---|
| Type | Straight |
| Inside Diameter Primary | 31mm |
| Inside Diameter Secondary | 31mm |
| Adhesive Lined | Yes |
| Material | Modified Polyolefin |
| Number of Breakouts | 1 |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +60°C |
| Shrunk Diameter Primary | 18mm |
| Shrunk Diameter Secondary | 7.1mm |
| Series | 202K1 |
- RS-stocknr.:
- 718-3200
- Fabrikantnummer:
- 202K142-3/42-0
- Fabrikant:
- TE Connectivity
- Moulded Boot Straight size 42
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.