TE Connectivity Straight, Modified Polyolefin Adhesive Lined, 30mm
- RS-stocknr.:
- 718-3111
- Fabrikantnummer:
- 202K132-3/86-0
- Fabrikant:
- TE Connectivity
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18/07/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 20,97
(excl. BTW)
€ 25,37
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 14 | € 20,97 |
| 15 - 49 | € 20,39 |
| 50 + | € 19,84 |
- RS-stocknr.:
- 718-3111
- Fabrikantnummer:
- 202K132-3/86-0
- Fabrikant:
- TE Connectivity
Datasheets
- Moulded Boot Straight size 32
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
Wetgeving en conformiteit
Productomschrijving
Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series
High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).
Specificaties
Kenmerk | Waarde |
|---|---|
| Type | Straight |
| Inside Diameter Primary | 30mm |
| Inside Diameter Secondary | 30mm |
| Adhesive Lined | Yes |
| Material | Modified Polyolefin |
| Number of Breakouts | 1 |
| Minimum Operating Temperature | -30°C |
| Maximum Operating Temperature | +105°C |
| Shrunk Diameter Primary | 14.2mm |
| Shrunk Diameter Secondary | 5.9mm |
| Series | 202K1 |
- RS-stocknr.:
- 718-3111
- Fabrikantnummer:
- 202K132-3/86-0
- Fabrikant:
- TE Connectivity
- Moulded Boot Straight size 32
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.