- RS-stocknr.:
- 718-2926
- Fabrikantnummer:
- 202K174-3/42-0
- Fabrikant:
- TE Connectivity
33 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 105,87
(excl. BTW)
€ 128,10
(incl. BTW)
Aantal stuks | Per stuk |
1 - 14 | € 105,87 |
15 - 49 | € 97,08 |
50 + | € 91,89 |
- RS-stocknr.:
- 718-2926
- Fabrikantnummer:
- 202K174-3/42-0
- Fabrikant:
- TE Connectivity
Datasheets
- Moulded Boot Straight size 74
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
Wetgeving en conformiteit
Productomschrijving
Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series
High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).
Specificaties
Kenmerk | Waarde |
---|---|
Type | Straight |
Inside Diameter Primary | 60mm |
Inside Diameter Secondary | 60mm |
Adhesive Lined | Yes |
Material | Modified Polyolefin |
Number of Breakouts | 1 |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +60°C |
Shrunk Diameter Primary | 35.1mm |
Shrunk Diameter Secondary | 15.7mm |
- RS-stocknr.:
- 718-2926
- Fabrikantnummer:
- 202K174-3/42-0
- Fabrikant:
- TE Connectivity
- Moulded Boot Straight size 74
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.