TE Connectivity Right Angle Cable Boot, Fluid Resistant Elastomer, 43mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CZ
Productomschrijving

General Purpose (Lipped) - 202K1 and 222K1 Series

Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

//media.rs-online.com/t_line/L239138-01.gif
Specificaties
Kenmerk Waarde
Type Right Angle Cable Boot
Inside Diameter Primary 43mm
Inside Diameter Secondary 43mm
Adhesive Lined No
Material Fluid Resistant Elastomer
Number of Breakouts 1
Shrunk Diameter Primary 28.2mm
Shrunk Diameter Secondary 9.9mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09/02/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
23,88
(excl. BTW)
28,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
23,88 €
15 - 49
23,17 €
50 - 99
22,39 €
100 - 249
21,71 €
250 +
21,07 €
Related Products
VG standard-compliant heatshrink connector terminal housing with inner ...
Description:
VG standard-compliant heatshrink connector terminal housing with inner lip, angledSuitable for connecting circular connectors on thin cablesEnsure mechanical protection and strain relief.
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...