TE Connectivity Straight Cable Boot Black, Fluid Resistant Elastomer, 24mm

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

General Purpose (Lipped) - 202K1 and 222K1 Series

Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

//media.rs-online.com/t_line/L239138-01.gif
Specificaties
Kenmerk Waarde
Type Straight Cable Boot
Inside Diameter Primary 24mm
Inside Diameter Secondary 24mm
Adhesive Lined No
Material Fluid Resistant Elastomer
Number of Breakouts 1
Colour Black
Minimum Operating Temperature -75°C
Maximum Operating Temperature +150°C
Shrunk Diameter Primary 10.4mm
Shrunk Diameter Secondary 5.6mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
968 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 10,56 €
9,36
(excl. BTW)
11,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
9,36 €
15 - 49
8,99 €
50 - 99
8,68 €
100 - 249
8,27 €
250 +
7,13 €
Related Products
VG standard-compliant heatshrink connector terminal housing with inner ...
Description:
VG standard-compliant heatshrink connector terminal housing with inner lip, angledSuitable for connecting circular connectors on thin cablesEnsure mechanical protection and strain relief.
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
The TE Connectivity 66mm inner diameter black cable ...
Description:
The TE Connectivity 66mm inner diameter black cable boot is heat shrinkable moulded part that provides lightweight screening and protection. It is a high-performance and reliable product offers balance of high-temperature fluid resistance and long-term heat resistance. This next generation ...