TE Connectivity End Cap Black, Polyolefin Adhesive Lined, 10mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

End Caps

Ensures that cable ends are waterproof and permits long term storage without risk of moisture penetration. It is a medium wall moulded cap internally coated with an adhesive sealant.,Installation is simple, the cap is centred over the end of the cable and on application of heat the cap shrinks to form a reliable seal.

Range; -40°C to +85°C

//media.rs-online.com/t_line/L397641-01.gif
//media.rs-online.com/t_line/LE397641-11.gif
//media.rs-online.com/t_line/LE397641-21.gif
//media.rs-online.com/t_line/LF397641-02.gif

Approvals

7777

Specificaties
Kenmerk Waarde
Type End Cap
Inside Diameter Primary 10mm
Adhesive Lined Yes
Material Polyolefin
Colour Black
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Shrunk Diameter Primary 4mm
65 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1465 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
Was 2,62 €
1,75
(excl. BTW)
2,12
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 70
1,75 €
8,75 €
75 - 245
1,662 €
8,31 €
250 +
1,576 €
7,88 €
*prijsindicatie
Related Products
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Designed for use where hazard reduction in the ...
Description:
Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by ...
Specially designed to provide mechanical and environmental protection ...
Description:
Specially designed to provide mechanical and environmental protection of stubs and splices in electrical harnesses and also ideal for sealing off cable ends. Clear cap allows see through inspection, black caps are flame retardant. Thick adhesive-lining forms an effective barrier ...
Ultra low profile construction for utilisation where space ...
Description:
Ultra low profile construction for utilisation where space is at a premiumLipped rim for mounting with backshell adaptorManufactured from fluid resistant elastomerTemperature (°C) -75 to +150.