RS PRO Heat Shrink Cable Marker Yellow 1.8 → 4.1mm Dia. Range

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

RS Heat-shrink Identification Sleeves

Heat shrinkable identification sleeves that are manufactured from high quality, flame retardant polyolefin with excellent performance properties. The marker sleeves are pre-cut and organised in a ladder format. The identification sleeves are extremely flexible with a thin wall design allowing them to be used with printers; reducing errors, installation time and cost.


Features and benefits
• Shrink ratio of 3:1
• Available in yellow or white, in a range of diameter sizes
• Ready to use for thermal transfer printers
• Flexible
• Flame retardant
• Good abrasion and chemical resistance
• Reliable physical, chemical and electrical properties
• Pre-cut tube with dotted line for tearing off the tube easily

Specificaties
Kenmerk Waarde
Affixing Method Heat Shrink
Minimum Cable Diameter 1.8mm
Maximum Cable Diameter 4.1mm
Colour Yellow
Width 4.8 mm
Quantity 250
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Fire Behaviour Flame Retardant
Resistant To Abrasion, Chemicals
Cable Diameter Range 1.8 → 4.1mm
Operating Temperature Range -55 → +125 °C
Standards Met CULus, RoHS Compliant
32 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 250
43,46
(excl. BTW)
52,59
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
43,46 €
0,174 €
*prijsindicatie
Related Products
ShrinkHoop™ grommet (URHR) is a high ratio heat-shrinkable ...
Description:
ShrinkHoop™ grommet (URHR) is a high ratio heat-shrinkable strain-relief grommet that can be placed over the cable assembly after the connector pinning operation is complete. Shrunk down, these rings are highly conformable and fill the space between the clamp-type connector ...
These labels feature a white strip over a ...
Description:
These labels feature a white strip over a 22 mm length for marking.System protects markings from dirt and from being deleted: once marked, unstick the tape and wrap round the wire or cable to be identified several times.Good resistance to ...
The TE Connectivity 1.2m heat shrink tube displays ...
Description:
The TE Connectivity 1.2m heat shrink tube displays excellent clarity when being used to protect bundle markers from severe mechanical and chemical abuse. It is also excellent for strain relieving soldered or crimped joints. Approximately 40 percent thinner walls than ...
The TE Connectivity 202A1 series black 25.4mm straight ...
Description:
The TE Connectivity 202A1 series black 25.4mm straight boot has a 3.8mm shrink diameter. This lipless heat shrink boot allows direct mounting to the back of the connector accessory thread. It is used for mechanical protection and connector/cable strain relief. ...