HellermannTyton WIC Clip On Cable Marker, Pre-printed 9 White 2 → 2.8mm Dia. Range

  • RS-stocknr. 408-4478
  • Fabrikantnummer 561-01699 WIC1-9-PA66-WH
  • Fabrikant HellermannTyton
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

WIC Snap-on Cable Markers

WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.


Features and benefits
• Fast and easy to use pre-printed nylon snap-on marker
• Ideal where termination is completed or for maintenance and repair
• Markers lock together to give perfect text alignment
• Vibration resistant markers
• Gripping system locks markers onto wire and resists rotation

Specificaties
Kenmerk Waarde
Affixing Method Snap On
Legend 9
Minimum Cable Diameter 2mm
Maximum Cable Diameter 2.8mm
Colour White
Length 3mm
Width 5 mm
Quantity 200
Printable No
Material Polyamide
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Resistant To Vibrations
Series WIC
Cable Diameter Range 2 → 2.8mm
Operating Temperature Range -40 → +85 °C
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
28 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 200
Was 7,47 €
6,43
(excl. BTW)
7,78
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
6,43 €
0,032 €
15 - 49
6,09 €
0,03 €
50 +
5,80 €
0,029 €
*prijsindicatie
Related Products
White nylon marker plates in six different sizes. ...
Description:
White nylon marker plates in six different sizes. These plates have a unique design with round holes instead of slots which allow the plates to be mounted vertically or horizontally, so that they can be used as tags, flags, or ...
Chevron cut PVC cable markers that are easily ...
Description:
Chevron cut PVC cable markers that are easily applied to equipment wires, cables and pipes. The design of the marker allows it to be easily applied over a range of cable sizes without the use of special tools. They are ...
Chevron cut PVC cable markers supplied on reels. ...
Description:
Chevron cut PVC cable markers supplied on reels. The design of the marker allows it to be easily applied over a range of cable sizes. They are manufactured from flexible, high grade PVC which conforms to IEC 684-3. Ideally suited ...
The TCGT cable markers are made from a ...
Description:
The TCGT cable markers are made from a 3:1 heat shrink material, polyolefin cross-linked (PO-X). They are supplied as a continuous tube that is printable on both sides and can be perforated at pre-determined lengths or fully severed. These heat ...