Brady Heat Shrink Cable Marker White 25.78 → 24.13mm Dia. Range

  • RS-stocknr. 364-9686
  • Fabrikantnummer PSPT-1000-1-WT
  • Fabrikant Brady
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: US
Productomschrijving

TLS2200 Heatshrinkable Sleeves

Heatshrinkable sleeves in polyolefin material allowing the marking of wires and cables before or during cabling.

Features and Benefits

• One sided printable
• Applications include: Wire and cable marking and panel identification
• Matte finish
• Compatible with TLS 2200, TLS-PC Link, BMP71
• Heat-shrinkable
• Self Extinguishing

Standards

MIL-DTL-23053/5C (Class 1), MIL-M-81531, MIL-STD-202F, METHOD 215 and UL224.

Specificaties
Kenmerk Waarde
Affixing Method Heat Shrink
Minimum Cable Diameter 11.43mm
Maximum Cable Diameter 24.13mm
Colour White
Length 42.16mm
Width 25.78 mm
Quantity 50
Material Polyolefin
Minimum Operating Temperature -70°C
Maximum Operating Temperature +130°C
Resistant To Flame
Cable Diameter Range 25.78 → 24.13mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25/02/2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Box of 50
65,64
(excl. BTW)
79,42
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
65,64 €
1,313 €
*prijsindicatie
Related Products
Irradiated polyolefin heat-shrinkable cable markers which shrink to ...
Description:
Irradiated polyolefin heat-shrinkable cable markers which shrink to 33% of their supplied diameter when heated above 120°C. The legends are printed in black against a white background, thus giving clear identification even under poor lighting conditions. The cable markers are ...
The TCGT cable markers are made from a ...
Description:
The TCGT cable markers are made from a 3:1 heat shrink material, polyolefin cross-linked (PO-X). They are supplied as a continuous tube that is printable on both sides and can be perforated at pre-determined lengths or fully severed. These heat ...
Presented on an A4 sheet to feed through ...
Description:
Presented on an A4 sheet to feed through laser printersRecommended for applications requiring high temperature, abrasion and chemical resistanceOperating temperature -40°C to +120°CSupplied in bags of 10 A4 sheets.
Flame retardant (3:1 shrink ratio) polyolefin sleeves used ...
Description:
Flame retardant (3:1 shrink ratio) polyolefin sleeves used for wire identification. The identification marks are permanent immediately after printing and remain legible even when exposed to solvents, fuels and oils. The sleeves are low profile and lightweight. They may be ...