HellermannTyton TCGT Heat Shrink Cable Marker White

  • RS-stocknr. 124-9445
  • Fabrikantnummer 553-33951 TCGT39-13WH-PO-X-WH (10)
  • Fabrikant HellermannTyton
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Heatshrink Cable Markers, Thermal Transfer

The TCGT cable markers are made from a 3:1 heat shrink material, polyolefin cross-linked (PO-X). They are supplied as a continuous tube that is printable on both sides and can be perforated at pre-determined lengths or fully severed. These heat shrink cable markers are compatible with the TrakMark DS, TT4000+, and TT430 printers.

Features and Benefits

Shrink ratio 3:1
Available in Black, Blue, Red, White, and Yellow
Cable range from 39 mm to 1 mm
Good mechanical strength and resistance to organic solvents and chemicals
Highly flexible
Fulfils CSA requirements
Delivery in convenient storage boxes
Easy label design with TagPrint Pro

Applications

The TCGT heat shrink cable markers are suitable for use on wind turbines and in the electrical, aerospace and defence Industries.

Approvals

RoHS, SA.

Specificaties
Kenmerk Waarde
Minimum Cable Diameter 13mm
Maximum Cable Diameter 39mm
Colour White
Length 10m
Material Cross Linked Polyolefin
Printable Yes
Minimum Operating Temperature -55°C
Maximum Operating Temperature +135°C
Series TCGT
Operating Temperature Range -55 → +135 °C
Standards Met ASTM D 876, CSA Certified, VDE 0530
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
Irradiated polyolefin heat-shrinkable cable markers which shrink to ...
Description:
Irradiated polyolefin heat-shrinkable cable markers which shrink to 33% of their supplied diameter when heated above 120°C. The legends are printed in black against a white background, thus giving clear identification even under poor lighting conditions. The cable markers are ...
Chevron cut PVC cable markers supplied on reels. ...
Description:
Chevron cut PVC cable markers supplied on reels. The design of the marker allows it to be easily applied over a range of cable sizes. They are manufactured from flexible, high grade PVC which conforms to IEC 684-3. Ideally suited ...
Heatshrinkable sleeves in polyolefin material allowing the marking ...
Description:
Heatshrinkable sleeves in polyolefin material allowing the marking of wires and cables before or during cabling. • One sided printable• Applications include: Wire and cable marking and panel identification• Matte finish• Compatible with TLS 2200, TLS-PC Link, BMP71• Heat-shrinkable• ...
WIC markers are applied to the wire by ...
Description:
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool ...