TE Connectivity Heat Shrink Cable Marker, Pre-printed 4 White 4 → 12mm Dia. Range

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Heatshrink Pre-Printed Cable Markers

Irradiated polyolefin heat-shrinkable cable markers which shrink to 33% of their supplied diameter when heated above 120°C. The legends are printed in black against a white background, thus giving clear identification even under poor lighting conditions. The cable markers are highly flame-retardant to ASTM B876 (burn time more than 5 seconds).

Features and Benefits

• Three sizes are available;
- Size 3//1: Nominal internal diameter 3 mm
- Size 6//2: Nominal internal diameter 6 mm
- Size 12//4: Nominal internal diameter 12 mm
• Continuous temperature range -55°C to +135°C (+300°C for short periods)
• 3:1 shrink ratio
• Easily and rapidly installed
• Good resistance to common fluids

Specificaties
Kenmerk Waarde
Affixing Method Heat Shrink
Legend 4
Minimum Cable Diameter 4mm
Maximum Cable Diameter 12mm
Colour White
Quantity 100
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +135°C
Resistant To Flame, Fluid
Cable Diameter Range 4 → 12mm
Tensile Strength 5MPa
Operating Temperature Range -55 → +135 °C
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
59 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 100
5,45
(excl. BTW)
6,59
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
5,45 €
0,054 €
15 - 49
5,16 €
0,052 €
50 +
4,89 €
0,049 €
*prijsindicatie
Related Products
High-performance, heat-shrinkable identification marker sleeves allow both sides ...
Description:
High-performance, heat-shrinkable identification marker sleeves allow both sides of the sleeves to be easily printed on, for easy readability of substantial amounts of information. The cable markers are designed to meet the wire and cable marking needs of manufacturers with ...
ShrinkTrak 3:1 heat shrinkable cable markers can be ...
Description:
ShrinkTrak 3:1 heat shrinkable cable markers can be used to easily identify wires and cables. The markers are arranged in a ladder-style structure to enhance the user’s ability to pick markers off the carrier. The side slits have been specifically ...
The TIPTAG HF is designed for identifying large ...
Description:
The TIPTAG HF is designed for identifying large wire and cable bundles in electronics and general cabling environments. They are also suitable for retrofit purposes. These cable identification tags are secured to cables and harness assemblies using cable ties up ...
The cable identifier for simple, quick and permanent ...
Description:
The cable identifier for simple, quick and permanent self-labelling of cables. The cable identifier is simply wrapped around the cable. A clear film protects the writing area from mechanical influences. The identifier consists of:1. Patented transparent pressure part2. White labelling ...