TE Connectivity Heat Shrink Cable Marker, Pre-printed 3 White 4 → 12mm Dia. Range

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Heatshrink Pre-Printed Cable Markers

Irradiated polyolefin heat-shrinkable cable markers which shrink to 33% of their supplied diameter when heated above 120°C. The legends are printed in black against a white background, thus giving clear identification even under poor lighting conditions. The cable markers are highly flame-retardant to ASTM B876 (burn time more than 5 seconds).

Features and Benefits

• Three sizes are available;
- Size 3//1: Nominal internal diameter 3 mm
- Size 6//2: Nominal internal diameter 6 mm
- Size 12//4: Nominal internal diameter 12 mm
• Continuous temperature range -55°C to +135°C (+300°C for short periods)
• 3:1 shrink ratio
• Easily and rapidly installed
• Good resistance to common fluids

Specificaties
Kenmerk Waarde
Affixing Method Heat Shrink
Legend 3
Minimum Cable Diameter 4mm
Maximum Cable Diameter 12mm
Colour White
Quantity 100
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +135°C
Resistant To Flame, Fluid
Operating Temperature Range -55 → +135 °C
Tensile Strength 5MPa
Cable Diameter Range 4 → 12mm
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
55 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 100
5,29
(excl. BTW)
6,40
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
5,29 €
0,053 €
15 - 49
5,02 €
0,05 €
50 +
4,75 €
0,048 €
*prijsindicatie
Related Products
The Brady yellow cable marking sleeve is a ...
Description:
The Brady yellow cable marking sleeve is a printer accessory ideal for electrical cable identification. It comes with a thermal transfer printed polyolefin material, ideal for wire and cable marking. The good quality label comes with a white translucent printable ...
The TIPTAG HF is designed for identifying large ...
Description:
The TIPTAG HF is designed for identifying large wire and cable bundles in electronics and general cabling environments. They are also suitable for retrofit purposes. These cable identification tags are secured to cables and harness assemblies using cable ties up ...
The cable identifier for simple, quick and permanent ...
Description:
The cable identifier for simple, quick and permanent self-labelling of cables. The cable identifier is simply wrapped around the cable. A clear film protects the writing area from mechanical influences. The identifier consists of:1. Patented transparent pressure part2. White labelling ...
Heatshrinkable sleeves in polyolefin material allowing the marking ...
Description:
Heatshrinkable sleeves in polyolefin material allowing the marking of wires and cables before or during cabling. • One sided printable• Applications include: Wire and cable marking and panel identification• Matte finish• Compatible with TLS 2200, TLS-PC Link, BMP71• Heat-shrinkable• ...