TE Connectivity Heat Shrink Cable Marker, Pre-printed "2" ,White ,4 → 12mm Dia. Range

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Heatshrink Pre-Printed Cable Markers

Irradiated polyolefin heat-shrinkable cable markers which shrink to 33% of their supplied diameter when heated above 120°C. The legends are printed in black against a white background, thus giving clear identification even under poor lighting conditions. The cable markers are highly flame-retardant to ASTM B876 (burn time more than 5 seconds).

Features and Benefits

• Three sizes are available;
- Size 3//1: Nominal internal diameter 3 mm
- Size 6//2: Nominal internal diameter 6 mm
- Size 12//4: Nominal internal diameter 12 mm
• Continuous temperature range -55°C to +135°C (+300°C for short periods)
• 3:1 shrink ratio
• Easily and rapidly installed
• Good resistance to common fluids

Specificaties
Kenmerk Waarde
Affixing Method Heat Shrink
Legend 2
Minimum Cable Diameter 4mm
Maximum Cable Diameter 12mm
Colour White
Quantity 100
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +135°C
Resistant To Flame, Fluid
Tensile Strength 5MPa
Cable Diameter Range 4 → 12mm
Operating Temperature Range -55 → +135 °C
72 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Bag of 100
5,45
(excl. BTW)
6,59
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
5,45 €
0,054 €
15 - 49
5,16 €
0,052 €
50 +
4,89 €
0,049 €
*prijsindicatie
Related Products
Chevron cut PVC cable markers supplied on reels. ...
Description:
Chevron cut PVC cable markers supplied on reels. The design of the marker allows it to be easily applied over a range of cable sizes. They are manufactured from flexible, high grade PVC which conforms to IEC 684-3. Ideally suited ...
ShrinkTrak 3:1 heat shrinkable cable markers can be ...
Description:
ShrinkTrak 3:1 heat shrinkable cable markers can be used to easily identify wires and cables. The markers are arranged in a ladder-style structure to enhance the user’s ability to pick markers off the carrier. The side slits have been specifically ...
The TLFX cable markers are made from a ...
Description:
The TLFX cable markers are made from a rail approved 2:1 heat shrink material, polyolefin cross-linked (PO-X). They are supplied as a continuous tube that is printable on both sides and can be perforated at pre-determined lengths or fully severed. ...
Presented on an A4 sheet to feed through ...
Description:
Presented on an A4 sheet to feed through laser printersRecommended for applications requiring high temperature, abrasion and chemical resistanceOperating temperature -40°C to +120°CSupplied in bags of 10 A4 sheets.