TE Connectivity Heat Shrink Cable Marker, Pre-printed 1 White 2 → 6mm Dia. Range

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Heatshrink Pre-Printed Cable Markers

Irradiated polyolefin heat-shrinkable cable markers which shrink to 33% of their supplied diameter when heated above 120°C. The legends are printed in black against a white background, thus giving clear identification even under poor lighting conditions. The cable markers are highly flame-retardant to ASTM B876 (burn time more than 5 seconds).

Features and Benefits

• Three sizes are available;
- Size 3//1: Nominal internal diameter 3 mm
- Size 6//2: Nominal internal diameter 6 mm
- Size 12//4: Nominal internal diameter 12 mm
• Continuous temperature range -55°C to +135°C (+300°C for short periods)
• 3:1 shrink ratio
• Easily and rapidly installed
• Good resistance to common fluids

Specificaties
Kenmerk Waarde
Affixing Method Heat Shrink
Legend 1
Minimum Cable Diameter 2mm
Maximum Cable Diameter 6mm
Colour White
Quantity 100
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +135°C
Resistant To Flame, Fluid
Tensile Strength 5MPa
Cable Diameter Range 2 → 6mm
Operating Temperature Range -55 → +135 °C
28 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
328 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 100
5,52
(excl. BTW)
6,68
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
5,52 €
0,055 €
15 - 49
5,23 €
0,052 €
50 +
4,99 €
0,05 €
*prijsindicatie
Related Products
Thin wall, flame retarded radiation cross-linked polyolefin heat-shrinkable ...
Description:
Thin wall, flame retarded radiation cross-linked polyolefin heat-shrinkable tubing, assembled as cut sleeves in a “ladder” configuration. Ideal for marking wires and cables by computer-based printing onto sleeves. The sleeves can also provide terminal insulation and strain relief. Features and ...
Heat shrink marker sleeves for cable and wire ...
Description:
Heat shrink marker sleeves for cable and wire identification. Designed for use with IDXPERT printer. Features and benefits• Wire and cable marking• 3:1 shrink ratio Polyolefin (B-342)• Smudge and smear resistant• Self-extinguishing• Temperature range -40 → 135°C.
Presented on an A4 sheet to feed through ...
Description:
Presented on an A4 sheet to feed through laser printersRecommended for applications requiring high temperature, abrasion and chemical resistanceOperating temperature -40°C to +120°CSupplied in bags of 10 A4 sheets.
Heatshrinkable sleeves in polyolefin material allowing the marking ...
Description:
Heatshrinkable sleeves in polyolefin material allowing the marking of wires and cables before or during cabling. • One sided printable• Applications include: Wire and cable marking and panel identification• Matte finish• Compatible with TLS 2200, TLS-PC Link, BMP71• Heat-shrinkable• ...