TE Connectivity Label Cable Label Refill, for Cable Heat Shrink Tube 50mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RNF100 Harmonised Cable Heatshrink Kit

Similar to the mixed colour kit (stock no. 113-2596) but with the addition of brown and grey heatshrink tubing to meet the requirements of the April 2004 – April 2006 change in phase colours in electrical building wires.

Contains selection of RNF100 tubing in a variety of colours and sizes to meet the requirements of the 16th Edition Wiring Regulations
Shrink Ratio 2:1
Temperature range: -55°C to 135°C
Flame retardant
Flexible
Excellent physical, chemical and electrical performance

RNF100 heatshrink in 1.2m lengths are available separately (see contents table)
Labels included in the Kit

10 yellow ’Caution’ stickers (90mm x 50mm) as per IEE recommendations for identifying joints between old and new phase colours in distribution boards. Vinyl overlaminated to provide good abrasion and solvent resistance
10 white harmonisation stickers (100mm x 50mm) depicting the pre and post-changeover colours in a clear and unambiguous manner, PET overlaminated to provide good abrasion and solvent resistance

Label refills are available separately, see stock nos. 487-4221 and 487-4237

Standards

VG95343 Part 5 type A&B, VDE 0341-pt 9005, AMS-DTL-23053/5 Class 1, BS 3G-198 11B

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Accessory Type Label
For Use With Cable Heat Shrink Tube
Carrier Width 50mm
Carrier Material PET
94 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Bag of 10
23,37
(excl. BTW)
28,28
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
23,37 €
2,337 €
*prijsindicatie
Related Products
System of strong polyester labels and transparent polyethylene ...
Description:
System of strong polyester labels and transparent polyethylene label holders fixed with nylon 6.6 tiesMarking and identification of cables, pipes, etcSuitable for temporary or permanent markingsSupplied as A4 sheets suitable for laser printersOperating temperature -60 → +65°C.
RiteOn cable marker label refills, replacement marker pens ...
Description:
RiteOn cable marker label refills, replacement marker pens and filled dispensers. The dispenser can be held easily in palm of hand to provide a flat writing surface. The flexible white vinyl film labels dispense automatically when liner is pulled from ...
Non-adhesive, repositionable and heat-transfer printed, DURASLEEVE is an ...
Description:
Non-adhesive, repositionable and heat-transfer printed, DURASLEEVE is an ideal solution for electrical wire marking.The label stays attached to the roll, thereby facilitating insertion in the label holder.Compatible with most label holders.Used for various types of cabinets (instrumentation and control panels).The ...
Core tag holder, closedFor use with EMT insertion ...
Description:
Core tag holder, closedFor use with EMT insertion labelsColour: transparentUndetachableFire protection rating in accordance with UL 94 V0Operating temperature -50 → +80 °CPVC, silicon-free.