Hirose Crimping Tool

  • RS-stocknr. 503-8369
  • Fabrikantnummer DF14-2628/CR/HT
  • Fabrikant Hirose
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Crimp Contacts and Crimping Tool

1.25mm Wire to Board - Hirose DF14

A miniature wire-to-board interconnect system.

Specificaties
Kenmerk Waarde
Crimp Tool Type Plier
Primary Keyword Crimping Tool
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
784,12
(excl. BTW)
948,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
784,12 €
Related Products
For marking cables that have already been installed.Positioning ...
Description:
For marking cables that have already been installed.Positioning tabs to keep the markers aligned.Transparent holders for quick distribution and fitting of markers on the conductor are sold separately.
From JST, this range of crimp contact and ...
Description:
From JST, this range of crimp contact and tooling is for RCY Series wire-to-wire connectors. • Stock number 688-1436 is a female crimp contact• Stock number 688-0883 is a Crimp insertion tool• Stock number 688-0887 is a Crimp Tool.
Description:
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. ...
The Panduit CT-1000 crimp tool is a controlled ...
Description:
The Panduit CT-1000 crimp tool is a controlled cycle semiautomatic ferrule crimping tool. The CT-1000 has an innovative rapid load design that utilizes continuously moulded ferrules to significantly reduce installation time. The CT-1000 controlled cycle tool cuts, strips and crimps ...