- RS-stocknr.:
- 619-957
- Fabrikant:
- RS PRO
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
220 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Per stuk (in een verpakking 10)
€ 8,25
(excl. BTW)
€ 9,98
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
10 - 90 | € 8,25 | € 82,50 |
100 - 490 | € 7,838 | € 78,38 |
500 + | € 7,426 | € 74,26 |
*prijsindicatie |
- RS-stocknr.:
- 619-957
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving
Flange Coupler
Flange Coupler supplied with lead sealing washer and male brass brush
20mm - overall length 37mm
25mm - overall length 43mm
20mm - overall length 37mm
25mm - overall length 43mm
RS PRO Flange Coupler Cable Conduit Fitting, 20 mm
This coupler cable conduit fitting from RS PRO allows you to join multiple types of the same conduit together to create a longer cable run in a straight line. It has a flanged end to enable reliable connections between conduits and includes a lead sealing washer to make these joints easier to secure.
The coupler is made of high-strength, durable steel. Its galvanised finish improves its integrity and resistance to rust or corrosion, meaning you'll need less maintenance for your cable setups in the long term. Use this fitting as part of lighting rigs in a variety of environments, or to set up power lines in industrial or domestic settings.
The coupler is made of high-strength, durable steel. Its galvanised finish improves its integrity and resistance to rust or corrosion, meaning you'll need less maintenance for your cable setups in the long term. Use this fitting as part of lighting rigs in a variety of environments, or to set up power lines in industrial or domestic settings.
Features and Benefits
Brass brush supplied for cleaning without marring finish
Nominal size of 20 mm
Meets European BS EN 50086 standards for cable conduits
Conforms to international ANSI/ESD S20.20:2014 and European BS EN 61340-5-1:2007 standards for electrostatic control
Nominal size of 20 mm
Meets European BS EN 50086 standards for cable conduits
Conforms to international ANSI/ESD S20.20:2014 and European BS EN 61340-5-1:2007 standards for electrostatic control
Standards
BS4568
Steel To BS4568 Accessories
A selection of accessories predominantly for use with steel conduits. For a more general range of accessories (Jack Chain, Locknuts, P clips and Adapters) please see stock no. 621-089 typically.,20 & 25mm Conduit Straps with a galvanised finish can be used, see stock no.s 312-2428 & 312-2434 respectively.
Specificaties
Kenmerk | Waarde |
---|---|
Fitting Type | Flange Coupler |
Nominal Size | 20mm |
Material | Steel |
Finish | Galvanised |
Standards Met | BS EN 50086 |