- RS-stocknr.:
- 204-4536
- Fabrikantnummer:
- HN 0
- Fabrikant:
- SKF
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
29 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 20,31
(excl. BTW)
€ 24,58
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 20,31 |
- RS-stocknr.:
- 204-4536
- Fabrikantnummer:
- HN 0
- Fabrikant:
- SKF
Wetgeving en conformiteit
- Land van herkomst:
- SI
Productomschrijving
SKF Hook Spanner, 16 to 20mm Jaw Capacity - HN 0
When you need to tighten or loosen a bearing lock nut, reach for this hook spanner from SKF. It has an adjustable jaw, so it can handle nuts sized between 16 and 20mm. It's a versatile option that you can use with bearings mounted on shafts or sleeves. Thanks to its simple handheld design, you'll find it easy to operate without feeling strain. The handle is protected by a plastic covering to enhance your grip and minimise the risk of corrosion.
Hooked jaw design for secure hold on nut
Plastic handle is resistant to dirt, oil and grease, so suitable for use in harsh environments
Hole in the handle for easy storage
Laser-engraved size designation for easy identification
Plastic handle is resistant to dirt, oil and grease, so suitable for use in harsh environments
Hole in the handle for easy storage
Laser-engraved size designation for easy identification
Applications
Material handling
Transportation industry
Food and beverage production
Transportation industry
Food and beverage production
How do I use this spanner to adjust a bearing lock nut?
Measure the size of the lock nut you want to remove using a tape measure or vernier calliper, then adjust the jaw to the appropriate size. Place it around the nut and slowly twist it in either direction depending on whether you want to tighten or loosen the nut.
Specificaties
Kenmerk | Waarde |
---|---|
Maximum Jaw Capacity | 20mm |
Minimum Jaw Capacity | 16mm |
- RS-stocknr.:
- 204-4536
- Fabrikantnummer:
- HN 0
- Fabrikant:
- SKF