Dairy Pipe Lines Stainless Steel Butterfly Valve BFDR2002E, 2in

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

RJT Butterfly Valve

316L stainless steel construction, fully machined from quality forgings
EPDM seals
Creep resistant bearings
Reinforced nylon handle
Reduced risk of contamination by top and bottom seals
Operating temperature -10ºC to +120°C
Working pressure 0.9 bar to 10 bar
Polished disc

//media.rs-online.com/t_line/L265372-01.gif
Specificaties
Kenmerk Waarde
Body Material Stainless Steel
Disc Material EPDM
Handle Material Glass Fibre Reinforced Nylon
Pressure Rating 0.9 → 10bar
Connection Size 2in
Maximum Operating Temperature +120°C
Minimum Operating Temperature -10°C
Operating Temperature Range -10 → +120 °C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
153,31
(excl. BTW)
185,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
153,31 €
Related Products
RS Pro Brand Screwed End Swing Check Valves ...
Description:
RS Pro Brand Screwed End Swing Check Valves that allow liquids to flow in only one direction. 1/2 - 3" (DN15 - DN80)W.P: 200 WOGW.T: -20°C - 200°C (-4°F - 392°F)Investment castingSocket weld (option)Thread type: ASME B1.20.1 (NPT), DIN 2999 ...
A compact stainless steel non return disc check ...
Description:
A compact stainless steel non return disc check valve designed for use with steam and hot condensate. These valves have a CE marking of PN25 / PN40. Connections are flanged (wafer type)Low pressure dropSimple and compact designHorizontal or vertical installation. ...
RS screwed end ball valves for the control ...
Description:
RS screwed end ball valves for the control of flow. Available in a variety of sizes. Investment castingBlow-out proof stemLocking deviceISO 5211 Mounting padTA-Luft approved (option)Length conform to DIN 3202/4-M3-2013SM3 (option)Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ISO7/1 and ...
RS Brand Stainless Steel Screwed End Ball Valves ...
Description:
RS Brand Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" to 4" (DN8 to DN100)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment castingBlow-out proof stemLocking deviceISO 5211 Mounting padThread type: ASME B1.20.1 (NPT) DIN2999 & ...