ETA Busbar, 24V dc

  • RS-stocknr. 631-9158
  • Fabrikantnummer Y307.016.01 BUSBAR
  • Fabrikant ETA
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

ESS20 Electronic Circuit Breakers

ESS20 electronic circuit breaker designed to selectively protect individual circuits powered from single switch-mode power supplies (SMPS). Easily added to a DIN/EN rail, the ESS20 provides advanced circuit protection for components used in factory automation systems.

Switchable current rating ranges 3A/6A
Manual on/off switch
Operating voltage 18-32volts DC
Reliable physical isolation of faulty loads
Bicolour LED fault indication
Product dimensions W 12.5mm H 105mm D 60mm

Specificaties
Kenmerk Waarde
Rated Operational Voltage 24V dc
Current Rating 50 A
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
19 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,98
(excl. BTW)
12,08
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
9,98 €
10 - 14
9,57 €
15 +
9,14 €
Related Products
Eaton busbars have been designed with excellent product ...
Description:
Eaton busbars have been designed with excellent product quality, tested reliability and safety stand for best protection of personnel, installations and plant. Single, double and triple pole busbarsFork type for connecting to the bottom of MCBsSuitable for use with FAZ ...
The Siemens range of 5ST3 busbars allow devices ...
Description:
The Siemens range of 5ST3 busbars allow devices such as the 5SV to be bus-mounted easily and safely in 2 or 4 phases. Simple wiring of all phases/conductors with one busbarAuxiliary switches can be connected when busbar installedCan be cut ...
Busbar system Busbar center-to-center spacing 60 mm Device ...
Description:
Busbar system Busbar center-to-center spacing 60 mm Device adapter, Width: 55 mm Bar thickness: 5.10 mm+TT profile for contactor with overload relay 3R, S2 with 1 DIN rail 35 mm, up to 56 A Length 182 mm.
The inner life of the KOPP MCB has ...
Description:
The inner life of the KOPP MCB has changed significantly compared with previous automatic cut-out technology. The thermal actuator consists of a bimetal snap disc that is integrated into the magnetic actuator. This has reduced the number of welded connections ...