compact Pin Busbar, 10mm2 connection: 3p

  • RS-stocknr. 187-5185
  • Fabrikantnummer 5ST3673-0
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Siemens 5ST3 Busbars

The Siemens range of 5ST3 busbars allow devices such as the 5SV to be bus-mounted easily and safely in 2 or 4 phases.

Features

Simple wiring of all phases/conductors with one busbar
Auxiliary switches can be connected when busbar installed
Can be cut to length

Compact Pin Busbar, 10mm2 connection: 3p/N 12x Compact device 1-pole touch protected 12 MW fixed length

Specificaties
Kenmerk Waarde
Material Copper
Range Sentron
Electrical Phase 3
Current Rating 63 A
For Use With Miniature Circuit Breakers
Series 5ST
16 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
23,90
(excl. BTW)
28,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
23,90 €
Related Products
Type B characteristic offers instantaneous short circuit response ...
Description:
Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short ...
Front mounting (automatic insertion), screwlessIsolated and separableConsecutive or ...
Description:
Front mounting (automatic insertion), screwlessIsolated and separableConsecutive or alternating connectionFor 10 blocks with 5 mm pitch - blue.
The connection busbars ensure correct installation of all ...
Description:
The connection busbars ensure correct installation of all "Prodis compatible" systems; DT 40 (1P+N and 3P+N), TL, CT, ITG 40, CM, etc.The busbars can be cut using a saw.
Rated 63A, 690V a.c.For distribution of power to ...
Description:
Rated 63A, 690V a.c.For distribution of power to MS116 motor starters in a panelNumber of devices accommodated, and auxiliary switch detail shown below.