Siemens 1 Phase Busbar, 400V ac, 1mm Pitch

  • RS-stocknr. 124-3146
  • Fabrikantnummer 5ST3701
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Specificaties
Kenmerk Waarde
Rated Operational Voltage 400V ac
Material Copper
Range Sentron
Electrical Phase 1
Pitch 1mm
Series 5ST
For Use With 1P Miniature Circuit Breakers
Current Rating 80 A
37 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
24,80
(excl. BTW)
30,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
24,80 €
Related Products
The BA9034N incorporates automatic standstill monitoring alongside a ...
Description:
The BA9034N incorporates automatic standstill monitoring alongside a contactor connected to the DC relay output. Motor restart while DC braking current injection can be avoided thanks to an inter-lock contact & built in safety brake. Asynchronous motor brake relays are ...
The inner life of the KOPP MCB has ...
Description:
The inner life of the KOPP MCB has changed significantly compared with previous automatic cut-out technology. The thermal actuator consists of a bimetal snap disc that is integrated into the magnetic actuator. This has reduced the number of welded connections ...
Allows completely safe feeding, without tapping in, of ...
Description:
Allows completely safe feeding, without tapping in, of protected single-block surge protector, Legrand top-entry / top-exit head-of-row differential switches and circuit breakers up to 40 A single-phase.For Ekinoxe flush-mount Plexo enclosures, 13 modules per row.
The comb busbars make it easier to install ...
Description:
The comb busbars make it easier to install Schneider Electric products. Supplied with 2 side platesSelf-extinguishing insulating material, colour RAL 7016The teeth left on standby can be isolated by tooth cover end-pieces.