Siemens 3 Phase Busbar, 400V ac, 1mm Pitch

  • RS-stocknr. 124-3143
  • Fabrikantnummer 5ST3710
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Specificaties
Kenmerk Waarde
Rated Operational Voltage 400V ac
Range Sentron
Material Copper
Electrical Phase 3
Series 5ST
For Use With 3P Miniature Circuit Breakers
Current Rating 80 A
Pitch 1mm
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
96,10
(excl. BTW)
116,28
(incl. BTW)
Aantal stuks
Per stuk
1 +
96,10 €
Related Products
The BA9034N incorporates automatic standstill monitoring alongside a ...
Description:
The BA9034N incorporates automatic standstill monitoring alongside a contactor connected to the DC relay output. Motor restart while DC braking current injection can be avoided thanks to an inter-lock contact & built in safety brake. Asynchronous motor brake relays are ...
The comb busbars make it easier to install ...
Description:
The comb busbars make it easier to install Schneider Electric products. Supplied with 2 side platesSelf-extinguishing insulating material, colour RAL 7016The teeth left on standby can be isolated by tooth cover end-pieces.
Range of cutable comb busbars compatible with IC60, ...
Description:
Range of cutable comb busbars compatible with IC60, IID, ISW-NA, IK60, IID K and ISW switch disconnector. Mounting mode: Horizontal Rated operational voltage: 415 V AC Rated insulation voltage: 500 V AC.
Professional range of Allen Bradley general purpose MCBs ...
Description:
Professional range of Allen Bradley general purpose MCBs accessories from the 1492 series. Accessories include auxiliary contacts, single phase busbars, busbar end caps, protective shrouds, shunt trips and terminal power feeds. All accessories are highly reliable and excellent quality.