Siemens 3 Phase Busbar, 400V ac, 1mm Pitch

  • RS-stocknr. 124-3142
  • Fabrikantnummer 5ST3708
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Specificaties
Kenmerk Waarde
Rated Operational Voltage 400V ac
Material Copper
Range Sentron
Electrical Phase 3
Pitch 1mm
For Use With 3P Miniature Circuit Breakers
Series 5ST
Current Rating 80 A
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
22,80
(excl. BTW)
27,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
22,80 €
Related Products
Busbars for safe and rational connection of distributor ...
Description:
Busbars for safe and rational connection of distributor installation devices, e.g. automatic cut-outs (MCB)1 and 3-phase versions availableNo end caps supplied with cut-to-length busbars, please order separately.
Range of cutable comb busbars compatible with IC60, ...
Description:
Range of cutable comb busbars compatible with IC60, IID, ISW-NA, IK60, IID K and ISW switch disconnector. Mounting mode: Horizontal Rated operational voltage: 415 V AC Rated insulation voltage: 500 V AC.
The comb busbars make it easier to install ...
Description:
The comb busbars make it easier to install Schneider Electric products. Supplied with 2 side platesSelf-extinguishing insulating material, colour RAL 7016The teeth left on standby can be isolated by tooth cover end-pieces.
Current rating:2AApproval bodies:UL, CSA, VDEIP rating: IP202 PoleTemp, ...
Description:
Current rating:2AApproval bodies:UL, CSA, VDEIP rating: IP202 PoleTemp, op. max: 60°CVoltage, contact AC max:24V.