Eaton 1 Phase Busbar, 6 Module, 415V

  • RS-stocknr. 144-327
  • Fabrikantnummer EVG-16/1PHAS/6MODUL+ZV-BS-G+FAZ-XK25
  • Fabrikant Eaton
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Busbars

Eaton busbars have been designed with excellent product quality, tested reliability and safety stand for best protection of personnel, installations and plant.

Single, double and triple pole busbars
Fork type for connecting to the bottom of MCBs
Suitable for use with FAZ & PLS6 series MCBs from Moeller
230 - 400Vac operating voltage

Supplied with

Protection shrouds

Specificaties
Kenmerk Waarde
Rated Operational Voltage 415V
Number Of Modules 6
Electrical Phase 1
Series EVG
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,44
(excl. BTW)
7,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
6,44 €
10 - 14
6,17 €
15 +
5,91 €
Related Products
Type B characteristic offers instantaneous short circuit response ...
Description:
Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short ...
The Siemens range of 5ST3 busbars allow devices ...
Description:
The Siemens range of 5ST3 busbars allow devices such as the 5SV to be bus-mounted easily and safely in 2 or 4 phases. Simple wiring of all phases/conductors with one busbarAuxiliary switches can be connected when busbar installedCan be cut ...
The inner life of the KOPP MCB has ...
Description:
The inner life of the KOPP MCB has changed significantly compared with previous automatic cut-out technology. The thermal actuator consists of a bimetal snap disc that is integrated into the magnetic actuator. This has reduced the number of welded connections ...
The connection busbars ensure correct installation of all ...
Description:
The connection busbars ensure correct installation of all "Prodis compatible" systems; DT 40 (1P+N and 3P+N), TL, CT, ITG 40, CM, etc.The busbars can be cut using a saw.