Toshiba 74VHCV541FT, 9, Octal Bus Buffer, 20.5 ns @ 50 pF 16mA, 20-Pin TSSOP

  • RS-stocknr. 171-3407
  • Fabrikantnummer 74VHCV541FT
  • Fabrikant Toshiba
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The 74VHCV540FT and 74VHCV541FT are advanced high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate CMOS technology. They achieve the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The 74VHCV540FT is an inverting type, and the 74VHCV541FT is a non-inverting type. When either G1 or G2 are high, the terminal outputs are in the high-impedance state. Input pin have hysteresis between the positive-going and negative-going thresholds. Thus the 74VHCV540FT and 74VHCV541FT are capable of squaring up transitions of slowly changing input signals and provides an improved noise immunity. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. These structure prevents device destruction due to mismatched supply and input/output voltages such as battery back up, hot board insertion, etc.

Wide operating temperature range: Topr = -40 to 125 
High speed: tpd = 4.1 ns (typ.) at VCC = 5.0 V
Low power dissipation: ICC = 2.0 μA (max) at Ta = 25 
Wide operating voltage range: VCC(opr) = 1.8 V to 5.5 V
Output current: |IOH|/IOL = 16 mA (min)(VCC = 4.5 V)
Power-down protection provided on all inputs and outputs.
Pin and function compatible with the 74 series (74AC/HC/AHC/LV etc.) 540 or 541 type

Specificaties
Kenmerk Waarde
Number of Element Inputs 1
Number of Elements per Chip 9
Maximum Propagation Delay Time @ Maximum CL 20.5 ns @ 50 pF
Maximum High Level Output Current -16mA
Maximum Low Level Output Current 16mA
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 20
Dimensions 6.5 x 4.4 x 1mm
Height 1mm
Length 6.5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Propagation Delay Test Condition 50pF
Automotive Standard AEC-Q100
Width 4.4mm
Minimum Operating Supply Voltage 1.8 V
1200 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 25)
0,304
(excl. BTW)
0,368
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 - 75
0,304 €
7,60 €
100 - 475
0,255 €
6,375 €
500 - 975
0,186 €
4,65 €
1000 +
0,147 €
3,675 €
*prijsindicatie
Verpakkingsopties
Related Products
A range of Switch Debounce ICs that are ...
Description:
A range of Switch Debounce ICs that are intended to ensure a clean interface between electromechanical switches and subsequent digital circuitry. The debounce function is effective on both closing and opening switch operations, and no additional components are required. Inputs ...
Description:
A range of Switch Debounce ICs that are intended to ensure a clean interface between electromechanical switches and subsequent digital circuitry. The debounce function is effective on both closing and opening switch operations, and no additional components are required. Inputs ...
The ST3232E is a 3 V powered EIA/TIA-232 ...
Description:
The ST3232E is a 3 V powered EIA/TIA-232 and V.28/V.24 communication interfaces with low power requirements, high data-rate capabilities and enhanced electrostatic discharge (ESD)protection. The ST3232E has a proprietary low-dropout transmitter output stage providing true RS-232 performance from 3 to ...
The 74HC245, 74HCT245 is an 8-bit transceiver with ...
Description:
The 74HC245, 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This ...