- RS-stocknr.:
- 170-5449
- Fabrikantnummer:
- 74LVC541APW,118
- Fabrikant:
- Nexperia
50 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk (in een verpakking 25)
€ 0,398
(excl. BTW)
€ 0,482
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
25 - 100 | € 0,398 | € 9,95 |
125 - 225 | € 0,242 | € 6,05 |
250 - 725 | € 0,23 | € 5,75 |
750 - 1475 | € 0,219 | € 5,475 |
1500 + | € 0,187 | € 4,675 |
*prijsindicatie |
- RS-stocknr.:
- 170-5449
- Fabrikantnummer:
- 74LVC541APW,118
- Fabrikant:
- Nexperia
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
The 74LVC541A is an octal non-inverting buffer/line driver with 5 V tolerant inputs and outputs. The 3-state outputs are controlled by the output enable inputs OE1 and OE2. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3 V and 5 V applications.
Mixed 5 V and 3.3 V applications
Improved current drive and voltage level of signals
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Improved current drive and voltage level of signals
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Specificaties
Kenmerk | Waarde |
---|---|
Logic Family | 74LVC |
IC Type | Octal Buffer & Line Driver IC |
Number of Channels per Chip | 8 |
Input Type | Single Ended |
Output Type | 3 State |
Polarity | Non-Inverting |
Mounting Type | Surface Mount |
Package Type | TSSOP |
Pin Count | 20 |
Maximum High Level Output Current | -24mA |
Maximum Low Level Output Current | 24mA |
Maximum Propagation Delay Time @ Maximum CL | 16 ns @ 50 pF |
Dimensions | 6.6 x 4.5 x 0.95mm |
Maximum Operating Supply Voltage | 3.6 V |
Minimum Operating Supply Voltage | 1.2 V |
Propagation Delay Test Condition | 50pF |