ON Semiconductor MB10S, Bridge Rectifier, 800mA 1000V, 4-Pin SOIC

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

ON Semiconductor MB1S-MB8S Bridge Rectifiers

Approvals

UL, E258596

The ON Semiconductor MB10S forms part of the MB series of 0.5A bridge rectifiers. It offers very high surge capabilities from a compact SOIC-4 package. With a surge overload rating of 35A (peak), the MB10S is ideal for PCB applications which require absorption of high surge currents. It also supports a 5.0 A²S rating for fusing. The MB10S is ideal for applications which need extra surge capability. It is designed for general purpose use, such as power supplies. 0.5 A forward current High surge current absorption Surge overload rating: 35A (peak) Breaks down voltages up to 1000 V Low-leakage

Versions Available:(772-9332) pack of 25(166-1967) reel of 3000

Specificaties
Kenmerk Waarde
Peak Average Forward Current 800mA
Bridge Type Single Phase
Peak Reverse Repetitive Voltage 1000V
Mounting Type Surface Mount
Package Type SOIC
Pin Count 4
Configuration Single
Peak Non-Repetitive Forward Surge Current 35A
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -55 °C
Peak Forward Voltage 1V
Peak Reverse Current 500µA
Length 4.95mm
Dimensions 4.95 x 4.2 x 2.5mm
Width 4.2mm
Height 2.5mm
150 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
950 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 25)
0,379
(excl. BTW)
0,459
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 - 25
0,379 €
9,475 €
50 - 225
0,36 €
9,00 €
250 - 475
0,229 €
5,725 €
500 - 975
0,218 €
5,45 €
1000 +
0,184 €
4,60 €
*prijsindicatie
Verpakkingsopties
Related Products
A 2 A single phase encapsulated bridge rectifier ...
Description:
A 2 A single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. They are intended for general applications in industrial and consumer equipment. • Suitable for printed circuit board mounting• Compact construction• High surge ...
The Bridge Rectifier converts an Alternating Current (AC) ...
Description:
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement ...
TYPICAL APPLICATIONSGeneral purpose use in AC/DC bridge full ...
Description:
TYPICAL APPLICATIONSGeneral purpose use in AC/DC bridge full wave rectification for power supply, home appliances, office equipment, industrial automation applications. • UL recognition file number E54214• Universal 3-way terminals: snap-on, wire wrap-around, or PCB mounting• Typical IR less than ...
The Bridge Rectifier converts an Alternating Current (AC) ...
Description:
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement ...