Vishay Bridge Rectifier, 2A, 1000V, 4-Pin

RS-stocknr.:: 708-2670
Fabrikantnummer:: 2W10G-E4/51
Fabrikant:: Vishay

Vishay Bridge Rectifier, 2A, 1000V, 4-Pin

80 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)

1030 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)

Toegevoegd

Prijs Per stuk (in een zak van 10)

€ 0,645

(excl. BTW)

€ 0,78

(incl. BTW)

Aantal stuks	Per stuk	Per Zak*
10 - 90	€ 0,645	€ 6,45
100 - 240	€ 0,612	€ 6,12
250 - 490	€ 0,549	€ 5,49
500 - 990	€ 0,523	€ 5,23
1000 +	€ 0,426	€ 4,26
*prijsindicatie

RS-stocknr.:: 708-2670
Fabrikantnummer:: 2W10G-E4/51
Fabrikant:: Vishay

Datasheets

Wetgeving en conformiteit

Land van herkomst:: CN

Productomschrijving

Bridge Rectifiers with Wire Leads, 2WxxG Series, Vishay Semiconductor

Low DC reverse current
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting

Approvals

UL E54214

Bridge Rectifiers - Vishay Semiconductor

The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.

Specificaties

Kenmerk	Waarde
Peak Average Forward Current	2A
Bridge Type	Single Phase
Peak Reverse Repetitive Voltage	1000V
Mounting Type	Through Hole
Package Type	WOG
Pin Count	4
Configuration	Single
Peak Non-Repetitive Forward Surge Current	60A
Maximum Operating Temperature	+150 °C
Minimum Operating Temperature	-55 °C
Peak Forward Voltage	1.1V
Peak Reverse Current	5µA
Dimensions	9.86 x 8.84 x 5.6mm
Length	9.86mm
Height	5.6mm
Width	8.84mm

RS-stocknr.:: 708-2670
Fabrikantnummer:: 2W10G-E4/51
Fabrikant:: Vishay