Conex-Banninger Straight Coupler Solder Ring Copper Solder Fitting for 15 x 15mm Pipes

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Straight & Adaptor Couplings

Standards

BS 2871 Part 1; BS 864 Part 2; ISO 274; BS 219 Grade 99 C

Approvals

WRC

Solder Ring Fittings

High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are a lead-free joint. The solder complies with BS219 Grade 99C. These products use the principle of capillary action to ensure that, when correctly joined to copper tube, a sufficient layer of lead-free solder is present between tube and fittings to form a mechanically strong, leak proof joint without the need for external solder application. Threaded components are in accordance with BS864 Part 2.,These fittings may be used with potable water, light mineral oils, natural or liquid petroleum gases or compressed air.

Specificaties
Kenmerk Waarde
Fitting Direction Straight
Fitting Type Coupler
Compatible Pipe Size 15 x 15mm
Material Copper
Solder Type Solder Ring
250 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 25)
0,398
(excl. BTW)
0,482
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 - 100
0,398 €
9,95 €
125 - 225
0,382 €
9,55 €
250 - 600
0,374 €
9,35 €
625 +
0,365 €
9,125 €
*prijsindicatie
Related Products
Brass FittingsWorking Pressure: 10 bar at 23°C, 7 ...
Description:
Brass FittingsWorking Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. Converts Air Ring Main Push-In Fittings to male BSP thread.
The Tectite range of remountable fittings have been ...
Description:
The Tectite range of remountable fittings have been designed to withstand the rigorous demands of the mechanical services sector. Manufactured from DZR brass. Provides an electrical continuity. For use in the mechanical services sector on hot and cold services, heating ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...