JG Speedfit 90° Brass Push Fit Fitting 22mm

  • RS-stocknr. 340-6754
  • Fabrikantnummer PM22WB
  • Fabrikant JG Speedfit
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Wingback Elbow

Brass Fittings,Working Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C

Air Ring Main System

The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points.

No need to prepare threaded pipe or apply solvent
Easy and quick to install, simple push-in connections
Safe, secure and leak-proof, ready for immediate use
Unique collet locking system holds tube firmly without deformation or flow restriction
Easy to disconnect and reconfigure the system
Instruction leaflet included

Temperature Range 0 to + 70°C
Working Pressure @ +23°C = 10 bar (145 psi)
Working pressure @ +70°C = 7 bar (101 psi)
Pipe tolerances: +0.05 to -0.10mm OD
Material, pipe: rigid (unplasticised) Nylon 12
Material, fittings: bodies engineering plastic (black acetal copolymer) or brass
'O' Rings: Nitrile rubber
Collets: acetal polymer with stainless steel teeth

Specificaties
Kenmerk Waarde
Fitting Direction 90°
Fitting Type Wall Plate Elbow Adapter
Material Brass
Push Fit Pipe Size 22mm
Thread Size 3/4in
Thread Standard BSP
632 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
17,86
(excl. BTW)
21,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
17,86 €
5 - 9
17,32 €
10 +
16,75 €
Related Products
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
High quality Water Research Council (WRC) approved copper ...
Description:
High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...