John Guest Straight Brass Push Fit Fitting 15mm x 1/2 in BSP Male

  • RS-stocknr. 199-2360
  • Fabrikantnummer 15MC(1/2)BRASS
  • Fabrikant John Guest
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Brass Male Couplers

Male brass thread to plastic push-in connector:

Features

Suitable for central heating systems
Push-fit and demountable connections
Corrosion free
No scale build up
BSI and WRAS approved

Applications

Mains fed and indirect cold water systems
Vented and unvented hot water systems
Vented and sealed central heating systems

Approvals

7777

SpeedFit Push-in Fittings

Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar at 65°C. Unsuitable for use with stainless steel pipe.

Specificaties
Kenmerk Waarde
Fitting Direction Straight
Fitting Type Coupler
Material Brass
Push Fit Pipe Size 15mm
Threaded Connection 1/2 in BSP Male
Demountable Yes
Gender Male
Thread Size 1/2in
Thread Standard BSP
36 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
395 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,51
(excl. BTW)
9,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
7,51 €
5 - 9
7,29 €
10 +
7,04 €
Related Products
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 ...
Description:
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. No need to prepare threaded pipe or apply solventEasy and quick to install, simple push-in connectionsSafe, secure and leak-proof, ready for immediate useUnique collet ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...