Phoenix Contact AI 0.75-12 GY Series Insulated Bootlace Ferrule Kit, 12mm Pin Length, 1.3mm Pin Diameter, Grey

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Insulated Bootlace Ferrules AI Series - Phoenix Contact

Phoenix contact provides you with a range of great insulated ferrules that can be crimped onto the end of a cable or wire to give your connection more stability and prevention from fraying. These bootlace crimp ferrules are made from a soft tin-plated electrolytic copper and have a soft plastic cover to further enhance the connection and prevention of fraying. Designed with safety in mind, they're free from any silicone and halogen.

Features and benefits:

  • Insulated

  • Prevent splicing of wires to ensure a stable connection over the long term

  • No need for soldering, a crimping tool is all that is required to fit the ferrules (see below for tools)

  • Reliability of close connections is massively increased

  • Maximum operating temperature of 105°C so can be used in harsh conditions

How to crimp a bootlace ferrule?

Ferrules are simple and easy to install. Firstly, they're mounted to the end of a stripped cable and are simply compressed onto the cable (typically with a tool) to form a tight and sturdy fit onto a cable. Once they're crimped onto the cable, give a gentle tug to ensure it is tight. Once you're sure it is tight, you can then proceed to mate your wire with connector.

What are bootlace ferrules used for?

Bootlace ferrules are used to help prevent the cable splicing or fraying when a connection is made. Typically the terminal blocks use a screw-connection, so if you have a bootlace ferrule mounted on your wire, this allows the screw to make a better bond rather than a few strands of metal cable. Not to mention, installing a bootlace ferrule ensures your connection is easier to install and remove.

Compatible hand tools:

  • Plier Crimper - 0.25mm² to 6mm²: 803-4405

  • Plier Crimper - 0.5mm² to 6mm²: 803-4427

  • Plier Crimper - 0.25mm² to 6mm²: 803-4411

  • Plier Crimper - 0.14mm² to 10mm²: 803-4420

Phoenix Contact Bootlace Ferrules

Specificaties
Kenmerk Waarde
Pin Diameter 1.3mm
Number of Entries 1
Insulation Material Plastic
Colour Grey
Pin Length 12mm
Insulation Insulated
Overall Length 18mm
Series AI 0.75-12 GY
1700 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,20
(excl. BTW)
0,24
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,20 €
20,00 €
500 - 2400
0,17 €
17,00 €
2500 - 4900
0,14 €
14,00 €
5000 - 9900
0,13 €
13,00 €
10000 +
0,119 €
11,90 €
*prijsindicatie
Related Products
Altech Uninsulated ferrules prevent wire strands from fraying ...
Description:
Altech Uninsulated ferrules prevent wire strands from fraying and breaking and are extremely cost effective. Their shorter lengths and uninsulated bodies offer unique advantages, such as making terminations in printed circuit board terminal blocks and in other terminal blocks with ...
A range of P-clips for secure clamping of ...
Description:
A range of P-clips for secure clamping of pipes, conduits and cables. Available in bright zinc plated steel or A2 grade 18 / 8 stainless steelSupplied with TPE or PVC liners to prevent chafing of pipe, cable, etc.Temperature range -30°C ...
A range of P-clips for secure clamping of ...
Description:
A range of P-clips for secure clamping of pipes, conduits and cables. Available in bright zinc plated steel or A2 grade 18 / 8 stainless steelSupplied with TPE or PVC liners to prevent chafing of pipe, cable, etc.Temperature range -30°C ...
Ready for all applications, thanks to 2 in ...
Description:
Ready for all applications, thanks to 2 in 1 bit holder: " internal hex and " square drivePowerful use even in hard to reach areas thanks to best head length to torque ratioBluetooth Connectivity module for tool feedback, soft start ...