RS PRO Crimp Bootlace Ferrule, 12mm Pin Length, 3.2mm Pin Diameter, 4mm² Wire Size

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Uninsulated Bootlace Ferrules

From RS Pro a range of high-quality uninsulated bootlace ferrules (also known as cord end terminals) for providing an economical and effective method of terminating multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting wires to terminal blocks and captive terminals.

What Is a Bootlace Ferrule?
A bootlace ferrule is a metal tube or ferrule with (or without) a moulded colour coded insulating collar made from nylon. The ferrule is slipped over the end of a multi-stranded wire, crimped and then inserted into a screw or spring clamp connection.

Where is a Bootlace Ferrule Used?
When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection

Features and Benefits
• Excellent electrical connection
• Reduces short circuits
• Tin plated copper tube for excellent conductivity
• Crimped terminal can be repeatedly inserted and removed without degrading end of the wire

Applications
Bootlace ferrules are used on multi-stranded wires that are being inserted into screw terminals and terminal blocks. Applications include consumer units, circuit breakers, electrical control panels and any equipment where there is a requirement for a multi-stranded wire connection.

How to Crimp a Bootlace Ferrule

How to Crimp a Bootlace Ferrule
Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal

Suitable Crimping Tools
For ferrules with a wire size range of 0.25 to 6 mm2 use crimping tool frame stock number 848-391 with crimping die 848-420

Approvals

-

Specificaties
Kenmerk Waarde
Maximum Wire Size mm² 4mm²
Pin Diameter 3.2mm
Number of Entries 1
Pin Length 12mm
Insulation Uninsulated
Maximum Wire Size AWG 12AWG
Overall Length 12mm
23200 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
22500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,043
(excl. BTW)
0,052
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,043 €
4,30 €
500 - 2400
0,036 €
3,60 €
2500 - 4900
0,032 €
3,20 €
5000 - 9900
0,028 €
2,80 €
10000 +
0,024 €
2,40 €
*prijsindicatie
Related Products
A range of tubular end sleeves or bootlace ...
Description:
A range of tubular end sleeves or bootlace ferrules.
Ferrules with insulating flangeProvide an equipotential link for ...
Description:
Ferrules with insulating flangeProvide an equipotential link for all the strands of a copper flexible conductorActive part in tinned electrolytic copperSingles - supplied in stripsCross-section : 4 mm²Colour : orangeNumber of strips or sachets : 10Number of ferrules per strip ...
From RS Pro a range of high-quality French ...
Description:
From RS Pro a range of high-quality French colour coded bootlace ferrules (also known as cord end terminals) for providing a clean end termination to multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting ...
A range of insulated bootlace wire ferrules made ...
Description:
A range of insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with a colour range that conforms to DIN 46228-4: 1990-09. These insulated bootlace wire ferrules are available with twin wire entries ...