Cooper Bussmann, 32A, A2, British Standard Fuse, gG - gM, 550V ac

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Cooper Bussman Bolted Tag Fuse - British Standard

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems

Features & Benefits

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

//media.rs-online.com/t_line/L413793-01.gif
Specificaties
Kenmerk Waarde
Current Rating 32 A
Fuse Size A2
Voltage Rating 550 V ac
Fuse Standard BS 88, IEC 269
Fixing Centres 73.5mm
Application Category GG - gM
Tag Width 8.7mm
High Rupture Capacity Yes
Overall Length 85mm
Body Diameter 21mm
Body Height 54.5mm
285 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
13,078
(excl. BTW)
15,824
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
13,078 €
65,39 €
*prijsindicatie
Related Products
Semiconductor fuse links have a precise pre-determined performance ...
Description:
Semiconductor fuse links have a precise pre-determined performance which ensures a low arc voltage and minimum let through current. Semiconductor fuses are suited to application in the field of traction, distribution of power, motor drives and in process industries. Melt ...
As the fuse allows for the starting surge ...
Description:
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A. Breaking capacity ...
Eaton’s Bussmann® series fuse links, size C1, are ...
Description:
Eaton’s Bussmann® series fuse links, size C1, are specifically designed for the protection of general industrial applications e.g. power distribution, cable protection, motor protection. Good peak let-through current limitation1:1:6 Selective coordination ratio between “minor” and “major” ...
Eaton’s Bussmann® series Red Spot centre tagged fuse ...
Description:
Eaton’s Bussmann® series Red Spot centre tagged fuse links (in sizes B1 to B4 and C1 to C3 and D1) are specifically designed for the protection of general industrial applications, e.g. power distribution, cable protection, motor protection. Good peak and ...