Microchip BM77SPPS3MC2-0007AA Bluetooth Chip 4.0

  • RS-stocknr. 861-0532
  • Fabrikantnummer BM77SPPS3MC2-0007AA
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

BM77 Bluetooth 4.0 Dual Mode Module

The Microchip BM77 Bluetooth 4.0 module is a Dual-Mode device able to communicate with other devices operating under Bluetooth Classic or BLE protocols.

Class 2 Bluetooth Classic and BLE Dual Mode
RF Output Power: +2dBm
Receiver sensitivity -90dBm (Classic), -92dBm (BLE)
OTA Data Rate: 3Mbps (Classic), 8Kbps (BLE)
Embedded Bluetooth stack
GAP, SDP, SPP, GATT profiles supported
Host communication: serial UART with CTS/RTS flow control
Easy to use transparent mode for data transfer via UART
Firmware is field upgradable via UART
Default automatic configuration mode for quick setup
Easy to configure with Windows® GUI or direct by MCU
I²C bus expansion port
Secure AES-128 encryption
Chip antenna with optional external antenna connection
Power supply: +3.3V to +4.3Vdc
Operating temperature range: -40 to +85°C
Surface mount module: 22 x 12 x 2.4mm
Castellated surface mount pads for easy and reliable host PCB mounting
Applications: Remote control/sensing, local communication for the Internet of Things (IoT)

Note

An evaluation kit is available for the BM77 module under RS Part No. 860-8725

Approvals

Bluetooth, FCC, IC, CE, Japan, KCC

Bluetooth - Microchip

Specificaties
Kenmerk Waarde
Bluetooth Class Class 2
Bluetooth Version 4.0
Maximum Output Power +2dBm
Supported Bus Interfaces UART
Supported I/O Interfaces Serial
Dimensions 22 x 12 x 2.4mm
Height 2.4mm
Length 12mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 22mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19/03/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
6,55
(excl. BTW)
7,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
6,55 €
Verpakkingsopties
Related Products
The Microchip BM78 is a Bluetooth Version 4.2 ...
Description:
The Microchip BM78 is a Bluetooth Version 4.2 Dual-Mode Module that supports BR/EDR and BLE communication. The module provides a fully certified Bluetooth solution that removes the hurdle of RF design regulatory and compliance testing, reducing development time.The BM78 supports ...
The RN42-SM is a through-hole PCB module featuring ...
Description:
The RN42-SM is a through-hole PCB module featuring the RN42 Bluetooth Class 2 radio designed for OEMs adding wireless capability to their products. The RN42 is perfect for battery powered applications and by default is ready to use in the ...
The Blue Gecko BGM111 Bluetooth Smart module integrates ...
Description:
The Blue Gecko BGM111 Bluetooth Smart module integrates a Bluetooth 2.4GHz RF transceiver, 32-bit ARM Cortex microcontroller and a Bluetooth Smart (BLE) software stack. The on-board microcontroller allows it to operate standalone without an external processor. Bluetooth 4.1 compliant SoC, ...
The TTL-234X-3V3-2mm cable is terminated by an 8 ...
Description:
The TTL-234X-3V3-2mm cable is terminated by an 8 way, 2mm pitch, Single-In-Line (SIL) keyed connector. The TTL-234X-3V3-2mm operates at +3.3V levels (signals only, VCC=+5V). These cables are primarily intended for interfacing the FTDI VDRIVE2 and VMUSIC2 modules. Note that when ...