Panasonic PAN1326B-HCI-85 Bluetooth Chip 4.0

  • RS-stocknr. 828-9024
  • Fabrikantnummer PAN1326B-HCI-85
  • Fabrikant Panasonic
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

PAN1316/26 Dual Mode v4.0 Bluetooth® EDR HCI Module, Panasonic

The PAN1316/1326 series from Panasonic are Host Controlled Interface (HCI) Dual Mode Bluetooth modules with Enhanced Data Rate (EDR) featuring both Bluetooth Low Energy and Bluetooth Classic connectivity. These modules contain the seventh generation CC2564 Bluetooth core integrated circuit from Texas Instruments incorporated into an easy to use module format. The PAN1316/26 range is 100% pin compatible with the PAN1315/1325 series.

Features

Certifications: Bluetooth, FCC, IC and CE
Dimensions: PAN1326 with antenna 9.0 x 9.5 x 1.8 mm, PAN1316 without antenna 9.0 x 6.5 x 1.7 mm
Operating Temperature Range: -20°C to +70°C
Supply Voltage Range: 1.7 - 4.8V
Texas Instruments’ CC2564 7th generation dual mode Bluetooth controller inside
Integrates with TI's low-power MSP430 microprocessor
Profiles: Serial Port Profile (SPP), Advanced Audio Distribution Profile (A2DP), Audio/Video Remote Control Profile (AVRCP) and others
Very fast algorithm for both Asynchronous Connection-Less (ACL) and Extended Synchronous Connections (eSCO)
Supports Extended Range Tx power with 10dBm typical output
Low power scan method for page and inquiry scans at 1/3rd normal power
UART rates of up to 4Mbps
Three and four Wire UART transport

Bluetooth - Panasonic

Specificaties
Kenmerk Waarde
Bluetooth Version 4.0
Maximum Output Power +10dBm
Receiver Sensitivity -93dBm
Supported I/O Interfaces GPIO, PCM, UART
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
412 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
6,67
(excl. BTW)
8,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
6,67 €
Verpakkingsopties
Related Products
The ATSAMB11-ZR is an ultra-low power, fully certified ...
Description:
The ATSAMB11-ZR is an ultra-low power, fully certified Bluetooth® Low Energy module with Integrated ARM® Cortex®-M0 MCU and application Flash memory. BluSDK Smart supports application profiles such as Proximity, Thermometer, Heart Rate, Blood Pressure, and many others. The qualified Bluetooth ...
The RN4020 is a fully-certified, Bluetooth Version 4.1 ...
Description:
The RN4020 is a fully-certified, Bluetooth Version 4.1 low energy module for designers who want to easily add low power wireless capability to their products. The small form factor, surface mount module has the complete Bluetooth stack on-board and is ...
BT121 is a Bluetooth 4.1 Smart Ready compliant ...
Description:
BT121 is a Bluetooth 4.1 Smart Ready compliant module that integrates a high performance Bluetooth radio, a low-power ARM Cortex microcontroller and a Bluegiga Bluetooth Smart Ready stack. This Smart Ready device provides simultaneous BR/EDR and BLE connectivity , communicating ...
The RN52 Bluetooth audio module provides a fully ...
Description:
The RN52 Bluetooth audio module provides a fully integrated solution for delivering high-quality stereo audio in a small form factor. It combines a Class 2 Bluetooth radio with an embedded DSP processor, controlled and configured by simple ASCII commands and ...