Take Up Bearing Unit, ST30, 30mm ID
- RS-stocknr.:
- 244-0769
- Fabrikantnummer:
- ST30
- Fabrikant:
- NSK-RHP
9 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 52,91
(excl. BTW)
€ 64,02
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 52,91 |
| 5 - 9 | € 50,79 |
| 10 + | € 49,74 |
- RS-stocknr.:
- 244-0769
- Fabrikantnummer:
- ST30
- Fabrikant:
- NSK-RHP
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving
Self Lube Bearing Take-Up Unit
Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.
Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
Supplied with
grease nipples
Bearing Take-Up Units
Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 30mm |
| Bearing Unit Type | Take Up Bearing Unit |
| Material | Cast Iron |
| Length | 115.5mm |
| Width | 101.5mm |
| Depth | 36.5mm |