- RS-stocknr.:
- 750-8986
- Fabrikantnummer:
- UCP210
- Fabrikant:
- RS PRO
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
69 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 44,30
(excl. BTW)
€ 53,60
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 44,30 |
5 - 9 | € 43,41 |
10 + | € 42,53 |
- RS-stocknr.:
- 750-8986
- Fabrikantnummer:
- UCP210
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- CN
Productomschrijving
RS PRO Pillow Block Bearing 50 mm ID
Looking to support a rotating shaft in low-loading conditions? Use this pillow-block bearing from the RS PRO range. It's used for applications where you don't need the exceptionally high strength of a plummer block in settings such as shipping yards, farms and manufacturing plants.
The bearing is quick to install as it comes greased and has pre-drilled holes in its mounting block for easy attachment to your equipment. There's no chance of water or dirt getting into your machinery and causing damage, as there's a seal around the bearing.
This part has been stringently tested by engineers for quality and safety. Pillow-block bearings like this one are frequently used in packaging machinery, heat-treatment facilities and conveyor systems.
The bearing is quick to install as it comes greased and has pre-drilled holes in its mounting block for easy attachment to your equipment. There's no chance of water or dirt getting into your machinery and causing damage, as there's a seal around the bearing.
This part has been stringently tested by engineers for quality and safety. Pillow-block bearings like this one are frequently used in packaging machinery, heat-treatment facilities and conveyor systems.
Features and Benefits
- Pillow-block bearing unit type
- Centre height of 57.2 mm
- Depth of 51.6 mm
- Inside diameter of 50 mm
- Length of 206 mm
- Overall height of 114 mm
- Cast-iron material
- Mounting hole centre-to-centre of 159 mm
- Mounting hole size of 20 mm
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 50mm |
Bearing Unit Type | Pillow Block |
Material | Cast Iron |
Centre Height | 57.2mm |
Mount Hole Size | 20mm |
Length | 206mm |
Depth | 51.6mm |
Overall Height | 114mm |
Mount Hole Centre-to-Centre | 159mm |