- RS-stocknr.:
- 213-2075
- Fabrikantnummer:
- SYJ 60 TF
- Fabrikant:
- SKF
7 op voorraad - levertijd is 4 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 150,21
(excl. BTW)
€ 181,75
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 150,21 |
- RS-stocknr.:
- 213-2075
- Fabrikantnummer:
- SYJ 60 TF
- Fabrikant:
- SKF
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- IT
Productomschrijving
SKF Pillow Block Bearing, 60mm Shaft Diameter, 3400rpm Limiting Speed - SYJ 60 TF
Mount your rotating shaft in a flash with this pillow block bearing from SKF. As it comes with predrilled holes in its base, it's easy to install on a support surface with nothing more complex than a pair of 16mm screws and a compatible driver. To get up and running, simply slide a shaft through the unit's inner ring and secure it in place with the built-in set screw. The insert bearing is pre-lubricated and sealed, so you'll find it's a smooth operator that doesn't need any maintenance.
Features & Benefits
Static load rating of 36kN and dynamic load rating of 52.7kN mean it can handle heavy-duty loads
Cast-iron housing is resistant to wear, impact and corrosion for use in harsh environments
Limiting speed of 3400rpm for use in high-speed applications
Seal and flinger to keep contaminants out and support a longer service life
Cast-iron housing is resistant to wear, impact and corrosion for use in harsh environments
Limiting speed of 3400rpm for use in high-speed applications
Seal and flinger to keep contaminants out and support a longer service life
Applications
Power transmission equipment
Agricultural sector
Heat-treatment facilities
Agricultural sector
Heat-treatment facilities
What shaft size is this unit designed for?
This bearing accepts shafts with a diameter of 60mm, so it's a good choice for use with compact equipment.
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 60mm |
Centre Height | 69.8mm |
Length | 164mm |