4 Hole Flanged Bearing, MFC50, 50mm ID

  • RS-stocknr. 213-3039
  • Fabrikantnummer MFC50
  • Fabrikant NSK-RHP
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

RHP - Self-Lube, Cast Iron, Cartridge Unit

Sealed bearing units to suit metric & imperial shafts.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
C3 internal radial clearance

Supplied with

grease nipples and full fitting instructions

Four-Bolt Flange Bearings - NSK

Specificaties
Kenmerk Waarde
Material Cast Iron
Inside Diameter 50mm
Length 161.9mm
Width 161.9mm
Depth 46.07mm
Number of Mount Holes 4
Mount Hole Size 10 mm
Mount Hole Centre-to-Centre 136.5mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
112,35
(excl. BTW)
135,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
112,35 €
5 - 9
108,88 €
10 +
105,32 €
Related Products
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when ...
Description:
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation. SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds ...
Four bolt flange bearing units from NSK. Made ...
Description:
Four bolt flange bearing units from NSK. Made from cast iron these self lubricated units are robust and long lasting. These bearing units are easy to fit and can be removed without any breakage allowing for easy re-fitting. Made from ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts. Bore sizes 12 to 30mm & 1/2 in to 1 1/4 in internal diameterQuick fit/dismantle2-bolt & 3-bolt versions available, in Metric or Imperial sizes.
Designed specifically for use in industries where frequent ...
Description:
Designed specifically for use in industries where frequent thorough wash downs are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range. Capable of accommodating initial misalignment whilst mountingRe-lubrication is possible through the ...