TecMate OptiMate 3x2 Lead Acid 12V 800mA Battery Charger with UKplug

  • RS-stocknr. 905-3595
  • Fabrikantnummer TM450BS
  • Fabrikant TecMate
Wetgeving en conformiteit
Land van herkomst: CN

OptiMATE 3 x 2

OptiMate 3 x 2 is totally automatic and fully protected against user errors. There are no switches. Short-circuiting the charger output resets the programme, without sparks or blown fuses. Affordable, compact, intelligent and forgiving of errors, OptiMate 3 is the perfect tool for regular or long-term maintenance of batteries not in daily use.
Can also be used to charge 24V vehicles with 2 x 12V batteries fitted

Recommended for: AGM / MF, STD, GEL and spiral cell batteries from 3Ah to 50Ah
Programme control: Microprocessor, 7 stages, fully automatic
Optimises battery power and life
Saves neglected batteries
Safe long-term maintenance cycle
Tests battery every hour
Enclosure classification: IP54
Easy direct wall mounting

Supplied with

4 interchangeable connection sets, two with clamps for bench charging, and two with in-line protection fuse and eyelet terminals for permanent attachment to in-vehicle battery to allow easy reconnection of charger when necessary.

Kenmerk Waarde
Number of Batteries Charged 2
Chemistries Charged Lead Acid
Plug Type UK
Batteries Included No
Model Number OptiMate 3x2
Dimensions 167 x 65 x 46mm
Charge Current 800mA
Input Voltage 100 → 240V
Output Voltage 12V
Weight 600g
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
161,59 €
Related Products
The 3 modes (constant current, timed constant voltage, ...
The 3 modes (constant current, timed constant voltage, continuous ’float’) optimise the charging process and permit the charger to be left connected indefinitely3-colour LED charge status indicatorInput: 190 to 264VReverse-polarity and short-circuit protectedLow leakage current - unit can be left ...
6 V, 12 V and 24 V lead–acid ...
6 V, 12 V and 24 V lead–acid battery chargers with cut-out.12 V versions are provided with several output current values.LED operating mode display.Protected against polarity reversal.Fitted with 2-hour timer (±30 min).Supplied with EU plugSupplied with 2 clip-on output connectors ...
The Ansmann battery charger is designed for 2V, ...
The Ansmann battery charger is designed for 2V, 6V, 12V, 24V plug-in lead-acid batteries and capacity ranging from 2Ah to 24Ah with a charge current of 900mA. This charger has to charge plugs suitable for the UK. It can prevent ...
This 230V professional battery charger is powerful, reliable ...
This 230V professional battery charger is powerful, reliable and portable making it suitable for any task in hand. Heavy-duty charge leads, crocodile clips and reverse polarity protection make this charger ideal for use in garages and workshop environments. Protection against ...